All products ship same day from our warehouse in Walnut, CA if ordered within the shipping cutoff times
PI Manufacturing TAA compliant products meet the U.S. Government's Trade Agreements Act (TAA), which fosters fair and open international trade.
TAA compliant products can only be acquired from products made in the United States or in an approved country.
2.1MP Outdoor Bullet Camera, 3.6mm Lens with Built-in Motion Sensor White LED (PIR Sensor), HD-TVI
Our 2.1MP bullet camera features a 1/3" Sony CMOS image sensor with support for 2.1MP TVI HD analog cameras. Unique to this camera is the built-in motion sensor LED that utilizes a PIR sensor. When an intruder engages the motion sensor on the camera, the LEDs will light up the area of capture, alerting intruders that they are being recorded and possibly deter them from continuing on with what they are doing. This also adds additional visibility to the intruder where and complements the the IR LEDs.
A 3.6mm fixed lens is included, which provides a wide angle view of your surroundings.
OSD control via UTC allows easier configuration of the camera through the DVR.
The camera provides an IP65 ingress rating which can be used for outside installations. The weatherproof construction protects against jets of water from all directions with full protection against dust and debris from entering into the enclosure.
Built-in Motion Sensor LED
With the built-in motion sensor LED utilizing passive infrared sensors, it complements the IR sensor, preventing theft by lighting up areas where motion is detected. This alerts intruders not to continue on because they are being recorded and adds additional visibility as well. See the video demo for a quick example scenario.
Note: Power adapter not included. Please see related products below for compatible power adapters.UPC: 091324415717
|Image Sensor||1/3" CMOS|
|Lens Type||3.6mm Fixed|
|Scan System||NTSC / PAL|
|Effective Pixels||TVI: 1920 (H) x 1080 (V)|
AHD: 1920 (H) x 1080 (V)
CVI: 1920 (H) x 1080 (V)
CVBS: 960 (H) x 480 (V)
|Alarm Type||Passive Infrared Detector|
|Passive Infrared Detector Distance||5 - 8 meter range (16.4 - 26.2 feet)|
|Noise Reduction||Supports 2D / 3D noise reduction|
|Day / Night Mode||With ICR and synchronization with IR LED|
|Min Illumination||0.01 Lux (Color) / 0 Lux (with IR)|
|IR Led||12pcs IR LEDs, 98ft IR Distance|
|White Led||12pcs White LEDs, 98ft IR Distance|
|Video Output||HD-TVI / AHD / CVI / CVBS|
|BLC||On / Off|
|AGC||Auto / Manual / Off|
|White Balance||ATW / Manual / Auto|
|S/N Ratio||More than 48dB (Auto Gain Off)|
|Max Transfer Distance||Coaxial Cable Transmission: more than 500m|
|Working Temperature||14°F - 122°F (-10°C - 50°C), relative humidity: 95%|
|Working Voltage||12V DC ± 10%, 1A|
See Us in Action