All products ship same day from our warehouse in Walnut, CA if ordered within the shipping cutoff times
Battery Powered IR Repeater Box
Our Leapmicro battery powered IR repeater box allows the user to control audio/video devices that are not in direct line of sight of the remote control. The box features a built in IR emitter to communicate with the source. An external IR emitter (not included) can be connected to the box if needed. The box features a built-in rechargeable Li-Po battery that only requires to be charged once. The power saving design makes one full charge last up to 1 year. Double sided tape are placed behind the box and IR repeater for a sturdy hold on most surfaces.
How to useAfter fully charging the repeater box, simply peel off the double sided tape on the IR repeater box and IR receiver. Place the IR receiver in the location where you will point the remote control. The IR emitter on the box must be facing the source (Blu-ray, DVD player, etc) to get the best IR signal. The box features an extra port for an optional IR emitter if needed.
Cancer and Reproductive Harm
(California law requires this warning to be provided to California customers)
|Receive IR Frequency / Distance||38kHz & 56kHz / 10m (32ft)|
|Battery Charge time / Power Duration||2 hour / 1 year after fully charged|
|Emitter Angle / Emitter Distance||≤ 100° / Maximum 1m (3.2ft) from source|
|Receiver Angle / Receiver Distance||≤ 90° / Maximum 10m (32ft) from remote|
|Cable Length||30cm (11.8 inches)|
|Dimension Repeater Box||40mm x 25mm x 17.5mm (L x W x H)|
|Dimension IR receiver||17mm x 10mm x 6.5mm (L x W x H)|