All products ship same day from our warehouse in Walnut, CA if ordered within the shipping cutoff times
PI Manufacturing TAA compliant products meet the U.S. Government's Trade Agreements Act (TAA), which fosters fair and open international trade.
TAA compliant products can only be acquired from products made in the United States or in an approved country.
Cat6a U/FTP Patch Cables
For bandwidth intensive applications that require speeds up to 10Gbps, PI Manufacturing Cat6a foil twisted pair U/FTP cables provide the performance and requirements. Rated at frequencies up to 750MHz, these Cat6a cables improve significantly by reducing alien crosstalk, allowing 10 Gigabit speeds to be reached without interference. For shielding, our Cat6a patch cables feature a foil twisted pair - each pair is individually shielded with a metal foil. This provides several benefits, including protection from EMI and RFI interference, better overall PoE support as a result of lower DC resistance and maximization of data rates. A snagless molded boot provides strain relief, while providing essential protection from unplugging and plugging. 26AWG bare copper conductors allow longer distances and faster speeds, while exceeding ANSI/TIA-568-C.2 standards.
Available in different lengths and colors, our Cat6a cables are UL listed, CSA approved and ETL verified.
This diagram shows a setup that is typically used for Cat6a. In this setup, we recommend using Cat6a keystones, patch panels, Cat6a S/STP bulk cables running in-wall and then Cat6a U/FTP patch cables going from the patch panel to the keystone jack and then to the equipment, such as a computer or network switch.
Cancer and Reproductive Harm
(California law requires this warning to be provided to California customers)
Products that are RoHS compliant have been verified through PI Manufacturing's supply chain to be in compliance with European Union (EU) directive 2011/65/EU on the Restriction of Hazardous Substances (RoHS). PI Manufacturing has taken all steps within its capacity to confirm a producers' statements / evidence in relation to compliance with restricted substances.
Directive 2015/863 adds four additional restricted substances (phthalates). PI Manufacturing has also verified that products are RoHS compliant in accordance with 2011/65/EU as amended by 2015/863.
For reference, these include the following in concentrations less than 1000ppm (0.1%).
PI Part: STP6AT-25-WH
Description: 25ft 26AWG Shielded (U/FTP) Cat6a Network Cable - White
|Material||Bare Copper Wire|
|Diameter||1.02 ± 0.05mm|
|Material||Aluminum Foil Mylar|
|Construction||100% coverage with 25% overlapping|
|Material||Bare Copper Wire|
|Diameter||5.8 ± 0.20mm|
|Conductor Resistance||26AWG Max. 148 ohms/km at 20°C|
|Insulation Resistance||Min. 10 mega ohms/m at 20°C|
|Dielectric Test||500 VAC; no breakdown|