All products ship same day from our warehouse in Walnut, CA if ordered within the shipping cutoff times
PI Manufacturing TAA compliant products meet the U.S. Government's Trade Agreements Act (TAA), which fosters fair and open international trade.
TAA compliant products can only be acquired from products made in the United States or in an approved country.
Cisco SFP-H10GB-CU2M Compatible 10GBASE-CU SFP+ Passive Direct Attach Copper Cable 2 Meter, 30AWG
For high speed, short length connections, these Cisco compatible SFP-H10GB-CU2M SFP+ direct attach cables are designed as a cost-effective, low latency, low power alternative to fiber optic cables. Typically used in data centers in between rack networks / servers, these direct attach cables are fully hot-pluggable, will support speeds up to 10 Gigabit Ethernet, and are fully compliant with MSA (Multi-Source Agreement) standards.
The Leapmicro SFP-10G-2M is backed with a 2-year warranty for reliability and performance from PI Manufacturing.
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
(California law requires this warning to be provided to California customers)
|Cable Jacket Type||PVC|
|Number of Lanes||1 - TX and 1 - RX|
|Maximum Data Rate||10Gbps|
|Operating Temperature||0 to 70°C|
|Storage Temperature||-40 to 85°C|
|Supply Voltage||3.3V nominal|
|Electrical Interface||20-pin edge connector|
20-pin edge connector
|Management Interface||Serial, I²C|
|High Speed Characteristics|
|Differential Input Return Loss||SDDXX||<-12+2* SQRT (f) with f in GHz|
<-6.3+13*Log10/(f/5.5) with f in GHz
|Common Mode Output Return Loss||SCCXX||< -7+1.6*f with f in GHz||dB||0.01~2.5GHz|
|Difference Waveform Distortion Penalty||dWDPc||6.75||dB|
|VMA Loss to Crosstalk Ratio||VCR||32.5||dB|
|Electrostatic Discharge (ESD) to the Electrical Pins||MIL-STD-883C Method 3015.7||Class 1 (>2000 Volts)|
|Electromagnetic Interference (EMI)||FCC Class B|
CENELEC EN55022 Class B
CISPR22 ITE Class B
|Compliant with Standards|
|RF Immunity (RFI)||IEC61000-4-3||Typically shows no measurable effect from a 10V/m field swept from 80 to 1000MHz|
|RoHS Compliance||RoHS Directive 2011/65/EU and its Amendment Directives 6/6||RoHS 6/6 compliant|
See Us in Action