All products ship same day from our warehouse in Walnut, CA if ordered within the shipping cutoff times
Wireless Magnetic Contact Alarm Sensor for Door / Window with Emergency Button, use with IP-CAM-PT100 series
The wireless magnetic contact alarm sensor is used to trigger an alarm when something is being opened that is not supposed to be. Typical examples of where to place the sensor would be on doors, drawers, windows and etc. Once movement is detected the device will send a wireless signal out to the mainframe to notify you. Lastly these device features an emergency button you can press to trigger off the alarm manually. This sensor must be used with IP-CAM-PT100.Features
Example Diagram - DIY Home Security System
UPC: 091324405756
WARNING:
Cancer and Reproductive Harm
www.P65Warnings.ca.gov
(California law requires this warning to be provided to California customers)
| Specifications | |
|---|---|
| Operating Voltage | DC1.5V (1* 1.5 AA battery) |
| Static Current | ≤2.5uA |
| Alarm Current | ≤135mA |
| Transmitting Distance | 395ft (120m) open area |
| Transmitting Frequency | 315M or 433M |
| Operating Temperature | -10°C ~ +50°C |
| Ambient Humidity | <80%RH (no condensation) |
| Mounting Method | Adhesive patches or screws |
| Button | Test and Emergency Alarm |
| Code | MCU with 2262/1527 optional |
| Low Battery Indicator | Yellow LED |
| Alarm Indicator | Red LED |
| Conforming Standard | GB 15209-2006 |
Frequently Purchased Together
