All products ship same day from our warehouse in Walnut, CA if ordered within the shipping cutoff times
PI Manufacturing TAA compliant products meet the U.S. Government's Trade Agreements Act (TAA), which fosters fair and open international trade.
TAA compliant products can only be acquired from products made in the United States or in an approved country.
Cisco QSFP-H40G-CU2M Compatible 40GBASE-CR4 QSFP+ Passive Direct Attach Copper Cable 2 Meter, 30AWG
For use with data center cabling, direct connection between networking equipment, and other short distance, high bandwidth applications, the QSFP-40G-2M QSFP+ cable is a Cisco compatible QSFP-H40G-CU2M passive direct attach cable that supports 40 Gigabit Ethernet applications (The QSFP+ form factor supports 4 x 10G lanes for a maximum data rate of 40Gbps. Both the TX (transmit) and RX (receiver) support 4 channels). The direct attach cable is connected through QSFP+ ports (Quad Small Form Factor Pluggable) and is hot-pluggable.
Designed as an alternative to more costly fiber optic cables, these passive twinax cables are made for high speed, short length connections, and are fully compliant with MSA (Multi-Source Agreement) standards.
The Leapmicro QSFP-40G-2M is backed with a 2-year warranty for reliability and performance from PI Manufacturing.
Cancer and Reproductive Harm
(California law requires this warning to be provided to California customers)
|Cable Jacket Type||PVC|
|Number of Lanes||4 - TX and 4 - RX|
|Maximum Data Rate||40Gbps|
|Operating Temperature||0 to 70°C|
|Storage Temperature||-40 to 85°C|
|Supply Voltage||3.3V nominal|
|Electrical Interface||38-pin edge connector|
38-pin edge connector
|Management Interface||Serial, I²C|
|High Speed Characteristics|
|Differential Input Return Loss||SDDXX||<-12+2* SQRT (f) with f in GHz|
<-6.3+13*Log10/(f/5.5) with f in GHz
|Common Mode Output Return Loss||SCCXX||< -7+1.6*f with f in GHz||dB||0.01~2.5GHz|
|Difference Waveform Distortion Penalty||dWDPc||6.75||dB|
|VMA Loss to Crosstalk Ratio||VCR||32.5||dB|
|Electrostatic Discharge (ESD) to the Electrical Pins||MIL-STD-883C Method 3015.7||Class 1 (>2000 Volts)|
|Electromagnetic Interference (EMI)||FCC Class B|
CENELEC EN55022 Class B
CISPR22 ITE Class B
|Compliant with Standards|
|RF Immunity (RFI)||IEC61000-4-3||Typically shows no measurable effect from a 10V/m field swept from 80 to 1000MHz|
|RoHS Compliance||RoHS Directive 2011/65/EU and its Amendment Directives 6/6||RoHS 6/6 compliant|