All products ship same day from our warehouse in Walnut, CA if ordered within the shipping cutoff times
PI Manufacturing TAA compliant products meet the U.S. Government's Trade Agreements Act (TAA), which fosters fair and open international trade.
TAA compliant products can only be acquired from products made in the United States or in an approved country.
10/100/1000Mbps Gigabit PoE Injector, 60W Output
The POE-INJ-1000-4 is a single port PoE injector that offers a compact and cost effective solution for remote powering of wireless access points, WiMAX CPE and base stations, IP cameras, and more. The injector fully supports up to 60W of power, allowing users to utilize their cables to run both data and power. The injector is also compliant with IEEE802.af and IEEE802.at standards and converts standard 100-240V AC power into low voltage over existing LAN cable. The PoE injector eliminates the need for an external power supply, reducing costs and simplifying installation.
How to Use
Data In: Connect to the Ethernet device (e.g. network switch) with a Cat5e / Cat6 Ethernet cable to transmit data
PoE / Data: Connect to the camera with a Cat5e / Cat6 Ethernet cable to support power
Power: Power LED, a steady green light indicates that the PoE injector gets 100-240V power input
Model A / Model B: 12.36 and 45.78-Powered LED lights
AC socket: connect with AC cable
Features
Diagram 1: General Connection
WARNING:
Cancer and Reproductive Harm
www.P65Warnings.ca.gov
(California law requires this warning to be provided to California customers)
| Specification | |
|---|---|
| No. of channels | 1 |
| Pass through data rates | 10/100/1000 Mbps |
| Power over Ethernet Output | Pin assignment and polarity: 1/2 (-), 3/6 (+) 4/5 (+) 7/8 (-) User port power: 30W, 60W |
| Output power voltage | 53V DC |
| Input power voltage | 100-240V AC |
| AC input current | 0.5A 100-240V AC |
| AC frequency | 50 to 60Hz |
| Indicators | System Indicator: AC power User Indicator: Channel power |
| Connectors | Shielded RJ-45, EIA 568A and 568B |
| Protection | Over current protection Over load protection Over voltage protection Anti-interference protection |
| Dimensions | 168mm x 73.5mm x 44mm |
| Operating temperature | 0°C - 40°C |
| Storage temperature | -10°C - 50°C |
| Operating humidity | Maximum 85%, Non-condensing |
| Storage humidity | Maximum 90%, Non-condensing |
| What's Included | |
|---|---|
| PoE Injector | 1pc |
| Power Cord | 1pc |
| User's Manual | 1pc |
Frequently Purchased Together
