All products ship same day from our warehouse in Walnut, CA if ordered within the shipping cutoff times
PI Manufacturing TAA compliant products meet the U.S. Government's Trade Agreements Act (TAA), which fosters fair and open international trade.
TAA compliant products can only be acquired from products made in the United States or in an approved country.
19 inch 12V DC Rackmount Power Supply, 18 Ports, DC Jack, 20 Amps
The 19 inch 12VDC rackmount power supply powers up to 18 of your 12 volt DC devices and is designed to be rack mounted inside a server room or rack. The rackmount power supply includes a front panel LED indicator to monitor the power status of each port. Our rackmount power supplies provide a safe and reliable option for powering your devices.
The rackmount power supply supplies a maximum current up to 20A at up to 1.85A per port with resettable PTC fuses on each port. This provides efficient power for security cameras and other devices.
The DC jack connection is perfect for a wide variety applications.
Protection mechanisms such a short circuit protection and overcurrent protection are integrated into the power supply.
Tested to UL950, CSA C22.2, and EMC standard FCC part 15.
18 Port DC Jacks
The rackmount power supply features 18 DC jacks, allowing it to power up to 18 12V DC devices. This centralizes power all in one location, providing an organized and efficient power structure.
Rack Mountable Design
We designed the power supply to be rack mountable, allowing it to be rack mounted onto any standard 19 inch rack.
20 Amps Maximum Current
At 20A total among all ports or 1.85A per port with a 1.85A resettable PTC fuse, the rackmount power supply is designed to power several types of 12V DC devices. Use it for HD-TVI, HDCVI, or AHD cameras, or use it on other 12V DC applications.
Features
WARNING:
Cancer and Reproductive Harm
www.P65Warnings.ca.gov
(California law requires this warning to be provided to California customers)
| AC Input | |
|---|---|
| Input Voltage Range | 120 ±10% VAC |
| Input Frequency | 50/60 Hz. |
| Input Current | 8A RMS Max for 120V AC |
| Inrush Current | 40A Max for 120V AC Cold Start |
| DC Output | |
|---|---|
| Voltage | +12V DC |
| Tolerance | +12.75 ~ +13.25 |
| Max Current (18 port) | 20A |
| Each Port Current | 1.85A (1.85A Resettable PTC Fuse) |
| Peak Current | 2A |
| Ripple & Noise | 100mV |
| Line Regulation | ±10% |
| Load Regulation | ±5% |
| Total Output | 240W Max |
| Electrical | |
|---|---|
| Efficiency | 85% Min, Under Max Range Load |
| Rise Time | N/A |
| Hold Up Time | N/A |
| Stability | ±0.5% After 24 Hours Warm Up |
| Overshoot | N/A |
| Leakage Current | 3.5mA Max at 120V AC |
| Output Protection | |
|---|---|
| Short Circuit Protection | Hiccup mode, recovers automatically after fault condition is removed |
| Overcurrent Protection | Hiccup mode, recovers automatically after fault condition is removed |
| Over Temperature Protection | N/A |
| Environmental | |
|---|---|
| Operating Temperature | 0°C to +40°C |
| Operating Humidity | 20% to 90% RH. |
| Operating Altitude | to 10,000ft |
| Storage Temperature | -20°C to +85°C |
| Storage Humidity | 10% to 95% RH. |
| Storage Altitude | to 50,000ft |
| Vibration | 10-500Hz, 2G 10Min/TCycle, for 60min. each axes |
| Cooling | Natural Draft |
| Reliability | |
|---|---|
| MTBF | 100k Hours at Max Load, Normal Line and 25°C |
| Mechanical | |
|---|---|
| Physical Dimensions (L x W x H) | 7.2" x 17.3" x 1.7" (182 x 440 x 44mm) |
| AC Connector | IEC 320 Type |
| DC Connectors | DC Jack |
| Safety Standards | |
|---|---|
| UL | UL950, CSA C22.2 |
| EMC Standards | |
|---|---|
| FCC | FCC Part 15 |
| Dielectric Withstand (Hi-Pot) | |
|---|---|
| Input to Output | 1500V AC for 1 Sec. |
| Input to Frame Ground | 1500V AC for 1 Sec. |
| Insulation Resistance | |
|---|---|
| Input to Output | 500V DC / 50 M Ohms |
| Input to Frame Ground | 500V DC / 50 M Ohms |
