Passive Video Balun (Terminal Type) for CCD Cameras, Power Pass Through - Monitor Side

PI Part #: NVA-P-201-ADA

Passive Video Balun (Terminal Type) for CCD Cameras, Power Pass Through - Monitor Side

Out of Stock; email notification on arrival.

Shipping Information

All products ship same day from our warehouse in Walnut, CA if ordered within the shipping cutoff times

TAA Compliance

PI Manufacturing TAA compliant products meet the U.S. Government's Trade Agreements Act (TAA), which fosters fair and open international trade.
TAA compliant products can only be acquired from products made in the United States or in an approved country.

Our Price: $3.70

Special Order

Note: Fully supports HD TVI/AHD/CVI cameras when used with HDB-A-110-PW or HDB-A-202-PW camera side baluns

Passive Video Balun, BNC Female, Provides Power Over Cat5, Monitor Side

The purpose of a passive video balun is to send a video signal and power through a Cat5e cable, this type of video balun is good for setups of up to 1000ft. PI Manufacturing offers a great passive video balun solution for your camera setup. This is great for small offices and home use at a great price due to cutting out expensive and heavy coaxial and power cables. It is also a great way to keep track of which cable belongs to which camera and in case of future maintenance, you would only be switching out a single CAT5e. Don't be fooled by other company's video baluns, 12V signals drop at about 300 ft. So if you run the cables too far, your cameras will not have enough power to operate. If you supply too much power such as an 18V, without a converter, you will burn your camera causing the project to more pricey that it needs to be. We stand behind our video baluns completely, we manufacture our own baluns and be reassured that we only use high quality materials ensuring our customers a satisfied, easy and safe setup. PI Manufacturing carries several other video balun setups, in which some includes converters for longer distance setups. We are confident that we have the perfect solution for your project whether it is for 4 cameras or 160.

  • Passive video balun
  • Monitor side
  • Provides power over Cat5
  • terminal and Screw type connection
  • Connectors: BNC female and DC female
  • Cables: BNC Male to Male and DC Male to Male, and 18VDC adapter (Included)
  • 18VDC power adapter can supply power to 650ft. 24VDC adapter will provide power over a longer distance (Sold separately).
Diagram Example Setup

Distance chart for passive/active video

Distance chart for power transmission using Cat5 or power cables

Video and Power Pin Out Assignment

Product Tutorials

Video Balun FAQ

Video Balun User Manual
Passive Baluns with Power
Part Camera-side
Power Output
Power Input
Surge &
NVA-P-100-SP pass-thru 3 RJ45 Y
NVA-P-110-PW 12VDC 500mA 3 terminal Y
NVA-P-110-SP pass-thru 3 terminal Y
NVA-P-110-PW-SG 12VDC 500mA 3 terminal Surge Y
NVA-P-110-SP-SG pass-thru 3 terminal Surge Y
NVA-501-W-KIT-1 pass-thru 3 terminal
NVA-501-W-KIT-2 pass-thru 3 terminal
NVA-871-SG-SP pass-thru 3 RJ45 surge Y
NVA-871-78-SP pass-thru 3 RJ45 Y
NVA-871-78-PW 12VDC 500mA 3 RJ45 overload Y
NVA-871-SG-PW 12VDC 500mA 3 RJ45 surge &
NVA-P-201 12VDC 500mA 3 terminal
NVA-P-201-ADA pass-thru 3 terminal
NVA-P-202-G-ADA pass-thru 3 terminal surge &
NVA-P-202-ADA pass-thru 3 terminal overload Y
NVA-P-202-PW 12VDC 500mA 3 terminal Y
NVA-P-202-G-PW 12VDC 500mA 3 terminal surge &
NVA-875-BS78-PW 12VDC 500mA 2 RJ45 overload
NVA-875-BS78-SP pass-thru 2 RJ45
RACK-016-45-SP pass-thru 3 RJ45

UPC: 091324278183

WARNING: Cancer and Reproductive Harm
(California law requires this warning to be provided to California customers)

Passive Video Balun, BNC Female, Provides Power Over Cat5, Monitor Side

Usage: Monitor side
Device category: Passive
sends power: over Cat5 cable
Connector for monitor side: BNC Female
Connector for the wires: Terminal block and screw type
Wire required: Cat5, Cat6, or phone cable
Maximum Distance: 1,000ft
Power Adapter Requirement: 18V DC adapter included; balun accepts 18V-24V DC, 24V DC Adapter is optional (Sold separately)
Remote power transmission: Sends DC, pass-thru, 18V-24V
Dimensions: 2.5" (64mm) x 3.0" (75mm) x 1.0" (25mm)
Weight: 2.2oz (60g)
Frequency response: DC to 6.5 MHz
Attenuation: RL = 75 to 100: 0.4 dB, RL = 75 to 600: 1.2 dB
Impedance: Coax - 75 ohm
UTP / Telephone cable - 100/600 ohm
Coax: unbalanced, 75 ohm
UTP C5E: Balanced twisted pair, 24 AWG, 100 ohm
Telephone cable: Balanced twisted pair, 26-28 AWG, 600 ohm

 (0 Reviews) Log in to post a review

Ask a Question. For immediate response, please call, email, or use the live chat function.

See Us in Action


Stay up to date with our new and featured products, exclusive deals, and everything that is connectivity. Subscribe to our newsletter below

Powered by Infinite Solutions since 1986