All products ship same day from our warehouse in Walnut, CA if ordered within the shipping cutoff times
PI Manufacturing TAA compliant products meet the U.S. Government's Trade Agreements Act (TAA), which fosters fair and open international trade.
TAA compliant products can only be acquired from products made in the United States or in an approved country.
General Purpose Heat Shrink Tubing
Used commonly in commercial and industrial applications where electrical insulation, repairing wire disconnects, and protecting wires is required, these general purposes heat shrink tubings feature a flame retardant polyolefin tubing that is highly resistant to common fluids and solvents. The heat shrink tubing has a shrinkage ratio of 2:1.
These general purpose heat shrink tubings are TAA compliant and an UL recognized component.
|Nominal Size||Minimum Expanded ID||Minimum Expanded Wall Thickness||Maximum Recovered ID after Heating||Maximum Recovered Wall Thickness|
Cancer and Reproductive Harm
(California law requires this warning to be provided to California customers)
|Properties||Specification Requirements||Test Method||Test Result|
|Longitudinal Change (150°C, 3min)||-10 ~10%||ASTM D 2671||Pass|
|Tensile Strength (500mm/min)||≧10.4MPa||ASTM D 638||≧11.4MPa|
|Elongation At Break (500mm/min)||≧200%||ASTM D 638||≧400%|
|Tensile Strength After Aging(158°C, 168hrs)||More than 70%||ASTM D 638||≧80%|
|Elongation After Aging(158°C, 168hrs)||≧100%||ASTM D 638||≧200%|
|Heat Shock(200°C, 4hrs)||No Cracking||ASTM D 2671||Pass|
|Cold Bend (-30°C, 1hr)||No Cracking||ASTM D 2671||Pass|
|Dielectric Voltage (AC 2500V, 60S)||No Breakdown||UL224||Pass|
|Volume Resistance||≧1014Ω cm||ASTM D 876||≧1014Ω cm|
|Dielectric strength||≧19.7KV/mm||ASTM D 2671||22 KV/mm|