All products ship same day from our warehouse in Walnut, CA if ordered within the shipping cutoff times
PI Manufacturing TAA compliant products meet the U.S. Government's Trade Agreements Act (TAA), which fosters fair and open international trade.
TAA compliant products can only be acquired from products made in the United States or in an approved country.
Adhesive Lined Heat Shrink Tubing
For protecting and sealing electrical connections, these heat shrink sleeve tubings are the perfect choice. These heat shrink tubings come in an assorted size that's ideal for installers and DIYers. The heat shrink tubing features a dual wall polyolefin hot melt adhesive lining to provide superior sealing and moisture protection for your connections.
TAA compliant and an UL recognized component, the heat shrink tubing provides a 3:1 shrinkage ratio.
|Minimum Expanded ID||Minimum Expanded Wall Thickness||Maximum Recovered ID after Heating||Maximum Recovered Wall Thickness||Adhesive Thickness|
Cancer and Reproductive Harm
(California law requires this warning to be provided to California customers)
|Properties||Specification Requirements||Test Method||Test Result|
|Tensile strength||10.3MPa minimum||ASTM D 638||≧12MPa|
|Elongation at break||200％ minimum||ASTM D 638||≧400％ minimum|
|Tensile strength after aging (158°C, 168hrs)||70％ of original minimum||ASTM D 638||≧90%|
|Elongation at break after (158°C, 168hrs)||100％ minimum||ASTM D 638||≧300％ minimum|
|Longitudinal shrinkage||15% max||UL 224||0 ~ 10％|
|Heat shock||No cracking||ASTM D 2671||Pass|
|Cold bend -30°C, 1 hour||No cracking||ASTM D 2671||No cracking|
|Dielectric voltage withstand and breakdown||AC 2500V 60 seconds no breakdown||ASTM D 2671||No breakdown|
|Volume resistance||1013Ω cm minimum||ASTM D 876||≧1014Ω cm minimum|
|Flammability||All tubing flame test||UL224||Pass|
|Copper corrosion||No corrosion||ASTM D 2671||Pass|