HDMI Extender Over Cat6 Cable with Built-in IR (Up to 180ft at 1080p)

PI Part #: HDMI-CAT6-70M

HDMI Extender Over Cat6 Cable with Built-in IR (Up to 180ft at 1080p)

In Stock; Ships same business day

Shipping Information

All products ship same day from our warehouse in Walnut, CA if ordered within the shipping cutoff times

Our Price: $55.00

Add to Cart

HDMI Extender Over Cat6 Cable with Built-in IR (Up to 180ft at 1080p)

Limited by the distance of HDMI cables and need a cost-effective way to extend the length of your HDMI cable? PI Manufacturing's HDMI extender extends HDMI signals up to 180ft using Cat6 cables with support up to 1080p. Built-in EDID pass-through allows display capabilities to be communicated. Constructed with a durable aluminum design with wall mountable cut outs for easy installation in any application, the HDMI extender features Full HD support and support for uncompressed audio outputs (LPCM, Dolby TrueHD, DTS Master Audio). IR control also allows you to easily control your source devices, such as Blu-ray players, television receivers, and other HDMI enabled devices.

Extending HDMI Cables through Cat6 Ethernet Cables

Designed as a solution for installations that require longer HDMI lengths, the HDMI-CAT6-60M uses Cat6 23AWG Ethernet cables to extend the length of a HDMI signal, with support for both video and audio up to 180ft at 1080p (1920 x 1080) without any loss of quality.

HDMI over Cat6 diagram

1080p Full HD

With support for resolutions up to 1080p / 60Hz, you're able to view your output in high definition. HDCP support also allows protected content to be effortlessly viewed without issues.

Audio Formats

The HDMI extender supports Dolby Digital Plus, Dolby TrueHD, 7.1 LPCM and DTS Master Audio formats.

Plug and Play Operation

Setting up the HDMI extender is as easy as plugging in the HDMI source on the transmitter end and then plugging in the HDMI display on the receiver end. Plug in the included IR cables on both ends to allow the IR signal to be sent remotely, select the length of Cat6 or higher Ethernet 23AWG cable (up to 180 feet) to plug into the Ethernet port on both ends of the transmitter / receiver, and then plug in the included 5V 1A power adapters on both ends for operation.

For best performance, we recommend the use of Cat6 or higher 23AWG bare copper cables if running at the peak length of 180 feet. In practice, if you're running at distances up to 75ft, using Cat5e / Cat6 24AWG will not be an issue.


  • Extends HDMI and IR over a single Cat6 cable
  • 1080p resolution at up to 180ft using Cat6 23AWG cable
  • Supports all HDMI features including 1080p Full HD, deep color, lip sync, CEC and all multi-channel audio formats, including Dolby Digital Plus, 7.1 LPCM, Dolby TrueHD and DTS Master Audio
  • 2 x 5V DC power adapters included
  • Resolution: 480i/480p, 576i/576p, 720p, 1080i/1080p
  • HDCP compliant
  • Control devices via IR signal
  • Easy to use
  • Plug and Play, no drivers needed
  • Aluminum housing for durability
  • Includes sender unit, receiver, 2 x AC adapters, 1 x TX IR cable, 1 x RX IR cable
  • Power Consumption: 2W (max) each

WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
(California law requires this warning to be provided to California customers)

HDCP Version1.3
Power Supply5V DC 1A
Resolutions Supported480i@60Hz
Network CableCat6 (23AWG)
Transmission Length180ft
IR Remote ControlSupports 20-60kHz
Power ConsumptionTX: <2W; RX: <2W
Operating Temperature32~104°F (0~40°C)
Storage Temperature-4~140°F (-20~60°C)
Humidity20-90% (non-condensing)
Product Dimensions (L x W x H)71.6 x 66.6 x 24.8mm
Product WeightTransmitter / Receiver - 2.95 oz / each (0.18 lbs)
Package Includes
What's Included1 - HDMI Transmitter (TX)
1 - HDMI Receiver (RX)
2 - Power Adapters
1 - IR Out Cable
1 - IR In Cable
1 - User Manual

 (0 Reviews) Log in to post a review

Powered by Infinite Solutions since 1986