HDMI Audio Extractor (Toslink S/PDIF, Coaxial Audio, RCA Audio L/R) - 4K / 60Hz
The 4K HDMI audio extractor allows you to extract audio from a HDMI source. This is useful if you want to connect your HDMI source to a separate audio output, such as an amplifier or speaker. With support for various audio formats (DTS-HD / Dolby TrueHD, LPCM 7.1, DTS, Dolby AC-3, and DSD), the device also supports the latest HDMI sources, with support for resolutions up to 4K / 60Hz at 4:4:4 chroma subsampling. HDCP 2.2 is also supported.
Note that for the device to work efficiently, please use the recommended HDMI cable distances listed on the specifications.
Supported Audio Outputs
The HDMI-AUDIO-4K-1 supports Toslink S/PDIF, Coaxial Audio, and RCA L/R audio, providing support for a wide range of devices. Supported audio formats include DTS-HD / Dolby TrueHD, LPCM 7.1, DTS, Dolby AC-3, and DSD.
Features
Diagram Example
UPC: 091324423248
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
(California law requires this warning to be provided to California customers)
| Specifications | |
|---|---|
| HDMI Resolutions | 4K / 60Hz 4K / 30Hz 1080p 1080i 720p 576p 576i 480p 480i |
| Audio Formats | DTS-HD / Dolby TrueHD LPCM 7.1 DTS Dolby AC-3 DSD |
| Maximum Bandwidth | 600MHz |
| Maximum Baud Rate | 18Gbps |
| Input / Output TMDS Signal | 0.5 ~ 1.5 Volts p-p (TTL) |
| Input / Output DDC Signal | 5 Volts p-p (TTL) |
| Input Cable Distance | ≤32 feet (1080p) / 16ft (4K) 28AWG HDMI cable |
| Output Cable Distance | ≤32 feet (1080p) / 16ft (4K) 24AWG HDMI cable |
| Maximum Working Current | 700mA |
| Power Adapter | AC (50Hz / 60Hz): 100V-240V; Output: 5V DC / 2A |
| Operating Temperature | 32°F ~ 104°F (-0° ~ +40°C) |
| Storage Temperature | -4°F ~ 140 °F (-20° to +60°C) |
| Operating Humidity Range | 5 to 85% RH (No Condensation) |
| Storage Humidity Range | 5 to 95% RH (No Condensation) |
| Dimensions | 4.13x2.24x0.89 inches (105x56.8x22.5mm) |
| Weight | 0.35 lbs (160g) |
HDMI installation - Audio extractor strips audio off HDMI
Bought this to supply audio to our stereo amp. Manual was technical, but I finally tried enough combinations that it started working. Option to pass video through, but I had the 8 port amplified splitter so used one of the ports for the audio. Set slide switch to the center pressed the audio switch to only pass audio. Need a flashlight and maybe a magnifying glass.Who We Are
Newsletters
