All products ship same day from our warehouse in Walnut, CA if ordered within the shipping cutoff times
PI Manufacturing TAA compliant products meet the U.S. Government's Trade Agreements Act (TAA), which fosters fair and open international trade.
TAA compliant products can only be acquired from products made in the United States or in an approved country.
Leapmicro Indoor Fiber Drop Cable, LSZH 1 Fiber 9/125 Single-mode - 305 Meters (1000ft)
For commercial / residential FTTx (Fiber to the x) applications, PI Manufacturing Leapmicro series indoor fiber drop cables provide a premium solution that delivers performance, coupled by reliability that's backed with our industry standard warranty.
Building upon the success of our other fiber solutions, our fiber drop cables provide a faster and more efficient installation.
Run from the distribution point or cable to the subscriber, drop cables improve on FTTx applications due to its use in field termination. Drop cables make it faster and more efficient to access the fiber when removing the PVC jacket. Additionally, its bend insensitive design provides more robustness when bent, resulting in less power loss.
Our fiber drop cables feature a LSZH jacket that resists and reduces the amount of toxic fumes and chemicals. This type of jacket is commonly used in military facilities or in less ventilated spaces where open air is not as abundant.
Our drop cables comes in a spool of 305 meters (1000ft).
Quick Assembly Fiber Connector Video DemoUPC: 091324407101
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
(California law requires this warning to be provided to California customers)
|Fiber OD (μm)||245±10|
|Sheath Thickness (mm)||≥0.4|
|OD of Cable (mm)||2.0*3.0±0.2|
|Net Weight||9kg (19.84 lbs)|
|Max. Tensile Loading (N)||600N|
|Length||305 meters (1000 feet)|
|Performance Parameters of the Optical Fiber|
|Chromatic Dispersion (ps/nm.km)||1310nm≤3.5|
|Zero Dispersion Slope (ps/nm2.km||≤0.092|
|Zero Dispersion Wavelength (nm)||1300 ~ 1324|
|Cut-off Wavelength (λcc) (nm)||≤1260|
|Attenuation vs. Bending (60mm x 100 turns) (dB)||(10mm radius, 1ring)≤1.5 at 1625nm|
|Mode Field Diameter (μm)||9.2±0.4 at 1310nm|
|Core-Clad Concentricity (μm)||≤0.5|
|Cladding Diameter (μm)||125±1|
|Cladding Non-circularity (%)||≤0.8|
|Coating Diameter (μm)||245±5|
|Proof Test (Gpa)||≥0.69|
For over 30 years, PI Manufacturing has been an industry leader in the design, manufacture, and distribution of cable assemblies, low voltage products, security surveillance solutions, electronic components, and pro audio / video solutions. Product quality is not always the same, especially from one supplier to the next, therefore PI Manufacturing makes sure all of our products pass our quality standards and specifications, complying with most directives and safety standards as necessary.
Who We Are