EOC (Ethernet Over Coax RG59 / RG6) Extender up to 500 Meter, Power from PoE Switch

PI Part #: EOC-UTP-3

EOC (Ethernet Over Coax RG59 / RG6) Extender up to 500 Meter, Power from PoE Switch

Out of Stock; email notification on arrival.

Shipping Information

All products ship same day from our warehouse in Walnut, CA if ordered within the shipping cutoff times

Product Highlights

  • Extends Ethernet signal over coax up to 500 meters (1640 feet)
  • Support IEEE802.3 10Base-T, IEEE802.3u 100Base-TX standard
  • Built in splicing slot with magnet and hanger
  • ESD protection
  • Plug and Play, no other sofware needed

Our Price: $55.00

Notify Stock

EOC (Ethernet Over Coax RG59 / RG6) Extender up to 500 Meter, Power from PoE Switch

The EOC-UTP-3 is an Ethernet over Coaxial extender which can transfer Ethernet signal by Ethernet cable or coaxial cable. This extender can transfer the Ethernet signal up to 500m through the coaxial cable. The extender consists of a SV unit and an IPC unit. For an application, you can plug a NVR to one of the ports on a switch, and then plug the SV unit to one of the other ports on the switch. From there, you would plug a coaxial cable from the SV unit to the coaxial end on the IPC unit. On the IPC side, you can either plug in an IP camera or hook up an additional switch so that you can hook up multiple or more IP cameras. The extender includes a built-in splicing slot on both sides, magnetic attraction, and a hanger on the bottom allows for a variety of installation methods. This extender is designed to meet the long-distance HD IP transmission for security surveillance projects.

This type of solution is ideal for a building or complex that has existing coax cable runs in place or for scenarios where you need to extend existing Ethernet cable runs. Instead of replacing all the cables in the wall for such a long run, using this adapter kit will allow for a quick solution without quality loss.


  • Using a single coaxial cable to extend runs
  • Extends over coax up to 500 meters (1640 feet)
  • Built in dial to switch between 10Mbps (500m) or 100Mbps (300m)
  • Low delay rate, less than 20us
  • Support IEEE802.3 10Base-T, IEEE802.3u 100Base-TX standard
  • Built-in splicing slot, unique and integrated design, splicing, desktop and wall-mounted installations available
  • ESD protection

Note: Please use RG59 or above coaxial cable and Cat5e/6 cable to reach the longest transmission distance. Also use standard coaxial connector to avoid abnormal display.

Product Diagram

WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
(California law requires this warning to be provided to California customers)

Power SupplyDC9~36V
PortBNC, RJ45
Transmission DistanceEthernet Cable: 0-100m
Coaxial Cable: 0-500m
MediaRG 59 or above coaxial cable & Cat5e/6
Network standardIEEE802.3 10 Base-T, IEEE802.3u 100BASE-TX
Status Indicator
Power indicationYellow on: Power is OK
Data indicationGreen on: Data connection is OK
RJ45 indicationGreen flicker: Data transmission is OK:
Yellow on: Power is OK
10Mbps (500m) / 100Mbps (300m)Speed dial switch must be set to 10M or 100M. Transmission distance can reach 500m or 300m.
ESD1a Contact Discharge Level 2
1b Air Discharge Level 3
Per: IEC61000-4-2
Lightning protectionIEC61000-4-5 Level 3
Operating Environmental
Working Temperature-10°C ~ 55°C
Storage Temperature-40°C ~ 85°C
Humidity (Non-condensing)0 ~ 95%
Dimension (L x W x H)113mm x 45.5mm x 29mm
What's Included
Ethernet Extender1pc (SV unit)
1pc (IPC unit)
Power Adapters2pc
User Manual1pc

 (0 Reviews) Log in to post a review

Ask a Question. For immediate response, please call, email, or use the live chat function.

See Us in Action


Stay up to date with our new and featured products, exclusive deals, and everything that is connectivity. Subscribe to our newsletter below

Powered by Infinite Solutions since 1986