1000ft Bare Copper 23AWG CMR Cat6 Bulk Cable, Solid Wire
Used for horizontal and backbone cable runs, the PI Manufacturing Category 6 (Cat6) solid wire cable conforms to the ANSI/TIA-568-C.2 standard and is UL listed, meeting safety and product specific requirements. Our Cat6 cables come in a bulk spool of 1000 feet and inside a pull box for efficient cable runs. 2ft increments are marked on the cable for keeping track of the usage.
Our bulk Cat6 cables are CMR rated (UL-1666 standard), and can be used to run between floors through risers or vertical shafts in non-plenum areas.
Solid wire cables feature a single strand (metal wire) that's typically used for long distance runs (up to 100 meters). They are typically used in horizontal or backbone cabling. A horizontal cabling system extends from the work area of a telecommunications outlet to the horizontal cross-connect of the telecommunications room. A backbone cabling system interconnects networks through telecommunications rooms, equipment rooms, and building entrances.
PI Manufacturing's cables are engineered to the tightest tolerances to deliver unwavering reliability during mission critical and stress intensive applications and are designed for both commercial or residential installations.
Cancer and Reproductive Harm
(California law requires this warning to be provided to California customers)
|Flame Test||CMR (riser-rated cable - UL-1666)|
|Jacket Material||PVC - Polyvinyl chloride|
|Speeds||10/100/1 Gigabit Ethernet (10 Gigabit Ethernet for distances up to 55 meters)|
|Conductor||Material: Bare Copper|
Average Thickness: 0.22mm
|Divider||Material: HDPE (4.7mm)|
|Rip Cord||Nylon rope|
Average Thickness: 0.5mm
|Electrical Properties||Refer to TIA/EIA-568C.2|
|Physical Properties||(1) Insulation: Tensile strength: 3000psi: (unaged) Elongation: 400%|
(2) Jacket: Tensile strength: 2100psi: (unaged) Elongation: 200%
(3) Flame Test: CMR
|Conductor Resistance||73.2 OHM / km at 20°C Max|
Spark Test: 1750V AC
Dielectric Strength: 1500V AC.2S