All products ship same day from our warehouse in Walnut, CA if ordered within the shipping cutoff times
PI Manufacturing TAA compliant products meet the U.S. Government's Trade Agreements Act (TAA), which fosters fair and open international trade.
TAA compliant products can only be acquired from products made in the United States or in an approved country.
1000ft Bare Copper 23AWG CMR Cat6 Bulk Cable, Solid Wire
Used for horizontal and backbone cable runs, the PI Manufacturing Category 6 (Cat6) solid wire cable conforms to the ANSI/TIA-568-C.2 standard and is UL listed, meeting safety and product specific requirements. Our Cat6 cables come in a bulk spool of 1000 feet and inside a pull box for efficient cable runs. 2ft increments are marked on the cable for keeping track of the usage.
Our bulk Cat6 cables are CMR rated (UL-1666 standard), and can be used to run between floors through risers or vertical shafts in non-plenum areas.
Solid wire cables feature a single strand (metal wire) that's typically used for long distance runs (up to 100 meters). They are typically used in horizontal or backbone cabling. A horizontal cabling system extends from the work area of a telecommunications outlet to the horizontal cross-connect of the telecommunications room. A backbone cabling system interconnects networks through telecommunications rooms, equipment rooms, and building entrances.
PI Manufacturing's cables are engineered to the tightest tolerances to deliver unwavering reliability during mission critical and stress intensive applications and are designed for both commercial or residential installations.
Features
WARNING:
Cancer and Reproductive Harm
www.P65Warnings.ca.gov
(California law requires this warning to be provided to California customers)
| Specifications | |
|---|---|
| Standards | UL 444 ANSI/TIA-568-C.2 ISO/IEC 11801 |
| Flame Test | CMR (riser-rated cable - UL-1666) |
| Jacket Material | PVC - Polyvinyl chloride |
| Conductors | Bare copper |
| Length | 1000ft |
| Speeds | 10/100/1 Gigabit Ethernet (10 Gigabit Ethernet for distances up to 55 meters) |
| Cable Structure | |
|---|---|
| Conductor | Material: Bare Copper Construction: 1C/0.58mm Diameter: 0.58±0.005mm |
| Insulation | Material: HDPE Average Thickness: 0.22mm Diameter: 1.02±0.02mm |
| Divider | Material: HDPE (4.7mm) |
| Rip Cord | Nylon rope |
| Jacket | Material: PVC Average Thickness: 0.5mm Diameter: 6.0±0.2mm |
| Characteristics | |
|---|---|
| Electrical Properties | Refer to TIA/EIA-568C.2 |
| Physical Properties | (1) Insulation: Tensile strength: 3000psi: (unaged) Elongation: 400% (2) Jacket: Tensile strength: 2100psi: (unaged) Elongation: 200% (3) Flame Test: CMR |
| Conductor Resistance | 73.2 OHM / km at 20°C Max Spark Test: 1750V AC Dielectric Strength: 1500V AC.2S |
| Center Degree | ≥93% |
Quality
The copper wire was exactly what was needed for our bulk shipment. PI consistently provides quality products.Cable
We have used this cable and it is always top notch. I won't buy any other riser cable from anyone else.
