All products ship same day from our warehouse in Walnut, CA if ordered within the shipping cutoff times
PI Manufacturing TAA compliant products meet the U.S. Government's Trade Agreements Act (TAA), which fosters fair and open international trade.
TAA compliant products can only be acquired from products made in the United States or in an approved country.
2.4GHz Wireless Outdoor CPE (Point-to-Point)
The ANT-S300CPE is a 2.4GHz wireless outdoor CPE for long distance point-to-point wireless transmission up to 1km or 3281 feet. Supporting speeds up to 150Mbps, the wireless CPE uses an industrial Qualcomm chipset that delivers a more stable and efficient wireless communication.
Built-in high gain 8dBi dual polarized directional antennas provide greater wireless coverage.
Support for an external PA and LNA makes the ANT-S300CPE suitable for long distance transmission.
The use of solid capacitors provides a longer life for the wireless CPE. Designed for outdoor use, the enclosure also comes with 8KV lightning protection for protection against voltage peaks from lightning strikes.
Point-to-Point Setup
In a point-to-point setup, the master CPE is plugged into the internet while the slave CPE is connected to a computer, camera, or any other device. The maximum transmission distance is up to 1km (3281 feet).
Typical Application
Point-to-point mode is mainly used for long distance wireless bridging of two bridges and is also the most commonly used networking mode. The bridges in the same box are bridged by default when shipped from the factory. The following figure shows an example of the how to manually configure the bridge.
Qualcomm Chipset
Featuring an industrial Qualcomm chipset, the wireless CPE delivers stability and performance for your long distance wireless applications.
Features
Accessories Include
WARNING:
Cancer and Reproductive Harm
www.P65Warnings.ca.gov
(California law requires this warning to be provided to California customers)
Specifications | |
---|---|
CPU | Qualcomm Industrial Chipset |
Memory | DDR2 64MB |
Ports | 2 x LAN ports (10/100Mbps) LAN1 supports 24V PoE power supply |
Frequency | 2.4GHz~2.483GHz |
Transmission Range | 1km (point-to-point) |
Transmission Power | Max 20dBm |
Standard | IEEE8022.11n, IEEE802.11g, IEEE802,11b, IEEE802.3u |
Protocol | CSMA/CA, TCP/IP, IPX/SPX, NetBEUI, DHCP, NDIS3, NDIS4, NDIS5 |
Power Consumption | <2W |
Power | 24V / 1A PoE power adapter |
Antenna | Built-in 2.4G directional dual polarized antenna |
Gain | 8dBi |
Operating Temperature | -20 to +55° C |
Storage Temperature | -40 to +70° C |
Operating Humidity | 10%~90% (Non-condensed) |
Package Includes | |
---|---|
What's Included | 2 - Wireless CPEs 2 - Fastening Rings 2 - 24V Power Adapters with 2 x RJ45 Ports 1 - Instruction Manual |