2.4GHz 802.11n/b/g, Indoor Ceiling Antenna with Access Point, Client Mode, Bridge, Repeater, 9dBi

Mfg: PI Manufacturing

PI Part #: ANT-ACP24-SU

2.4GHz 802.11n/b/g, Indoor Ceiling Antenna with Access Point, Client Mode, Bridge, Repeater, 9dBi

In Stock; Ships same business day

Shipping Information

All products ship same day from our warehouse in Walnut, CA if ordered within the shipping cutoff times



TAA Compliance

PI Manufacturing TAA compliant products meet the U.S. Government's Trade Agreements Act (TAA), which fosters fair and open international trade.
TAA compliant products can only be acquired from products made in the United States or in an approved country.

Our Price: $199.00

Add to Cart

2.4GHz 802.11n/b/g, Indoor Ceiling Antenna with Access Point, Client Mode, Bridge, Repeater, 9dBi

This indoor ceiling with access point is 802.3at compliant wireless radio, and features high output power. This wireless ceiling antenna also looks great indoors, with a clean white outside finish on the casing. This device is most effective when indoors, so common places to use it would be in a home, an office, hotel, meeting room, airport, and much more.

Features

  • 802.11 n/b/g Access Point/ Bridge / Client / Repeater with integrated 9 dBi MIMO antenna
  • High Speed: 300Mbps
  • Indoor use: Great choice for hotel, meeting room, airport, campus, etc.
  • WPA and WEP supported. 64-bit / 128-bit WEP encryption; Wi-Fi Protected access (WPA) and WPA2
  • Includes POE, power cord, Screws and plastic anchors

Details

  • Standards Compliance: IEEE 802.11n/b/g
    IEEE 802.3
    IEEE 802.3u
    IEEE 802.3at PD
  • SDRAM: 32M Bytes
  • Flash: 8M Byte
  • Radio Frequency Type: DSSS / OFDM
  • Modulation: IEEE 802.11b: CCK, DQPSK, DBPSK
    IEEE 802.11n: OFDM with BPSK, QPSK, 16QAM, 64QAM
  • Frequency Band: America/FCC: 2.412~2.462 GHz (11 Channels)
    Europe CE/ETSI: 2.412~2.472 GHz (13 Channels)
  • Transmission Power: Up to 28dBm
  • Transmission Rate: IEEE 802.11b: 1 / 2 / 5.5 / 11 Mbps
    IEEE 802.11g: 6 / 9 / 12 / 18 / 24 / 36 / 48 / 54 Mbps

    IEEE 802.11n (2x2 HT20):
      13.5 / 27 / 40.5 / 54 / 81 / 108 / 121.5 / 135 @ GI=800ns,
      15 / 30 / 45 / 60 / 90 / 120 / 135 / 150 @ GI=400ns

    IEEE 802.11n (2x2 HT40):
      27 / 54 / 81 / 108 / 162 / 216 / 243 / 270 @ GI=800ns
      30 / 60 / 90 / 120 / 180 / 240 / 270 / 300 @ GI=400ns
  • Access Point Interfaces: Auto MDI/MDI-X Ethernet 10/00Base-TX: RJ-45
  • Sensitivity: -93@1Mbps
    -84dBm @ 11Mbps
    -75dBm @ 54Mbps
    -68dBm @ HT-20, MCS-15
    -64dBm @ HT40, MCS-15
  • Antenna Type: 9dBi MIMO antenna
  • Security Systems: 64-bit / 128-bit WEP encryption
    Wi-Fi Protected Access (WPA) / WPA2
  • Wireless Setting: Operation Mode - AP / Pt(M)P Bridge / Client / Repeater
  • Software/Firmware: Site survey
    DHCP Client
    Suppressed SSID
    Station Separation
    Spanning Tree settings
    Wireless access control by MAC address filter (up to 50)
    Support multiple SSID with 802.1q VLAN tagging (up to 4)
    Profile isolation from each other using VLAN (802.1q) standard
    Web-based configuration via popular browser (MS IE, Google Chrome, etc...)
    Windows AP locator utility for fast management
    Firmware upgrade and configuration backup via Web Browser
    Reset and/or restore to default by WebUI or by Reset button
    Support Auto-reboot & schedule reboot
    VPN pass-through
    SysLog
    Support SNMP v1/v2c, MIBI, MIB II (RFC-1213)
    Support QoS (WMM) and wireless traffic shaping & time settings
    Support Time settings, Ping function and Trace Route function
    Maximum clients 128 (each VLAN supports 32 clients)
  • Operating Environment: 0° ~ +50°C
  • Power: 802.3at PD complied, 48 Volts by external PoE Injector
  • Compliances: RoHS, FCC
  • Network Management System Browser Support: Standard SNMP interface support Windows XP, Vista, Windows 7, Windows 8

UPC: 091324386659

WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
(California law requires this warning to be provided to California customers)

Specification
Standards ComplianceIEEE 802.11n/b/g
IEEE 802.3
IEEE 802.3u
IEEE 802.3at PD
SDRAM32M Bytes
Flash8M Byte
Radio Frequency TypeDSSS / OFDM
ModulationIEEE 802.11b: CCK, DQPSK, DBPSK
IEEE 802.11n: OFDM with BPSK, QPSK, 16QAM, 64QAM
Frequency BandAmerica/FCC: 2.412~2.462 GHz (11 Channels)
Europe CE/ETSI: 2.412~2.472 GHz (13 Channels)
Transmission PowerUp to 28dBm
Transmission RateIEEE 802.11b: 1 / 2 / 5.5 / 11 Mbps
IEEE 802.11g: 6 / 9 / 12 / 18 / 24 / 36 / 48 / 54 Mbps

IEEE 802.11n (2x2 HT20):
    13.5 / 27 / 40.5 / 54 / 81 / 108 / 121.5 / 135 @ GI=800ns,
    15 / 30 / 45 / 60 / 90 / 120 / 135 / 150 @ GI=400ns

IEEE 802.11n (2x2 HT40):
    27 / 54 / 81 / 108 / 162 / 216 / 243 / 270 @ GI=800ns
    30 / 60 / 90 / 120 / 180 / 240 / 270 / 300 @ GI=400ns
Access Point InterfacesAuto MDI/MDI-X Ethernet 10/00Base-TX: RJ-45
Sensitivity-93@1Mbps
-84dBm @ 11Mbps
-75dBm @ 54Mbps
-68dBm @ HT-20, MCS-15
-64dBm @ HT40, MCS-15
Antenna Type9dBi MIMO antenna
Security Systems64-bit / 128-bit WEP encryption
Wi-Fi Protected Access (WPA) / WPA2
Wireless SettingOperation Mode - AP / Pt(M)P Bridge / Client / Repeater
Software / FirmwareSite survey
DHCP Client
Suppressed SSID
Station Separation
Spanning Tree settings
Wireless access control by MAC address filter (up to 50)
Support multiple SSID with 802.1q VLAN tagging (up to 4)
Profile isolation from each other using VLAN (802.1q) standard
Web-based configuration via popular browser (MS IE, Google Chrome, etc...)
Windows AP locator utility for fast management
Firmware upgrade and configuration backup via Web Browser
Reset and/or restore to default by WebUI or by Reset button
Support Auto-reboot & schedule reboot
VPN pass-through
SysLog
Support SNMP v1/v2c, MIBI, MIB II (RFC-1213)
Support QoS (WMM) and wireless traffic shaping & time settings
Support Time settings, Ping function and Trace Route function
Maximum clients 128 (each VLAN supports 32 clients)
Operating Environment0° ~ +50°C
Power802.3at PD complied, 48 Volts by external PoE Injector
RoHSYes
FCCYes
Network Management System Browser SupportStandard SNMP interface support Windows XP, Vista, Windows 7, Windows 8
Accessories


Software and Drivers

 (0 Reviews) Log in to post a review

Ask a Question. Get answers to questions you may have.


See Us in Action

Newsletters

Stay up to date with our new and featured products, exclusive deals, and everything that is connectivity. Subscribe to our newsletter below

Powered by Infinite Solutions since 1986