All products ship same day from our warehouse in Walnut, CA if ordered within the shipping cutoff times
Free ShippingReviews 1 - Resale, Wholesale Pricing Available
PI Manufacturing TAA compliant products meet the U.S. Government's Trade Agreements Act (TAA), which fosters fair and open international trade.
TAA compliant products can only be acquired from products made in the United States or in an approved country.
Dual Motor 3-Stage Electric Adjustable Height Sit or Stand Desk Frame - White
The sit or stand desk frame is designed for users looking to customize desk setup height. Powered by a dual motor setup, the desk frame can adjust height from 24.4 to 50.4 inches via the included controller. The controller also includes a memory storage function to store custom heights based on user. The width of the frame can also be manually adjusted from 39.4 to 66.9 inches for use with several table sizes. A high efficiency power supply is included to power the motor. Additionally, the motor has thermal and overload protection for safety. A cable management shelf is also included to keep cables hidden and organized.
The design of the desk frame fits a variety of desktop shapes and sizes to accommodate various setups.
An efficient dual electric motor that produces less than 50dB of noise allows easy adjustments of heights from 24.4 - 50.4 inches via the included controller. Customize the height to your particular preference.
The width can also be adjusted manually from 39.4 - 66.9 inches to fit a variety of table tops.
Through the keypad, you can control up / down movements, set timers to remind you to adjust your height, or store 3 height settings in memory for easy adjustments.
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
(California law requires this warning to be provided to California customers)
|Table Top Thickness||>2.5cm (>0.98")|
|Product Size||1000X700X630mm (39.4"X27.6"X24.8")|
|Table Top Size||(1100-2200)X(700-1000)mm (43.3"-86.6")X(27.6"-39.4")|
|Desk Height Range||620-1280mm (24.4"-50.4")|
|Width Range||1000-1700mm (39.4"-66.9")|
|Maximum Weight||100kg/ 220lbs|
|Table Leg Qty.||2|
|Operating Temperature||-5°C ~ 40°C|
|Control Type||Touch Screen|
Very nice product that I can recommend.I just purchased the ADTABLE-M25-WH power sit / stand desk frame and I am very please with the unit. It arrived on time with no damage. The instructions were easy to follow and assembly was straightforward and accurate. The only discrepancies that I found was the instruction materials list noted one fastener as being a quantity of 10, while only 6 were provided and needed. There also were two oval shaped plastic pieces included in the materials, but no mention in the instructions and no logical place for them to be used. I purchased the suggested tables top from IKEA, and it fit well and looks great. Some notes for buyers: 1. No lockwashers are included in the fasteners. I suggest using a thread-locking compound like Loctite or Threadlock No. 42 from Harbor Freight. 2. When you set up the frame on the underside of the tabletop, make certain that it is recessed back sufficient that the screw heads don't stick out past the edge of the table. 6 mm / 0.25" or more. 3. With a wide tabletop, the screws on one or both of the brackets holding the cable management shelf will be too short to clamp tightly to the cross beam. I used a couple of stick on felt cushions on the opposite side of the bracket to make up for it rather than scrounge for longer screws. That worked very well. Although the twin motors are not silent, they are very quiet and reasonably fast. Top to bottom takes about 20 seconds. The three predefined positions are nice. The unit does "go to sleep" after about 60 seconds. The wake up is a two step process. Touch once to turn on the display, then hold the "M" for 3 seconds to enable motion. That last step isn't intuitive, but easy to find in the documentation. I was concerned that they unit would wobble when raised up, but it is very rigid. A nice, solid feel. My only regret is that it doesn't come in black. But that is a very minor complaint.
For over 30 years, PI Manufacturing has been an industry leader in the design, manufacture, and distribution of cable assemblies, low voltage products, security surveillance solutions, electronic components, and pro audio / video solutions. Product quality is not always the same, especially from one supplier to the next, therefore PI Manufacturing makes sure all of our products pass our quality standards and specifications, complying with most directives and safety standards as necessary.
Who We Are