5.8GHz IEEE 802.11a Access Point, Bridge, Client (No Antenna Function)
PI Manufacturing presents outdoor access point to create a network bridge from central quarters to remote buildings. With thorough testing, it was determined that data is sent at a frequency of 5.8 GHz and with the addition of an antenna, the data is capable of traveling a distance of 2 miles for optimal connection. The device itself is weatherproof and waterproof where all of the connections are secured through casings that will prevent any infiltration of debris or water. Features
- 802.11a 5.8GHz access point / bridge / client
- Comes with N female port for antenna attachment
- Supports 5.15GHZ - 5.825GHz
- Transmission Power: 20dBm
- Transmission Rate: 802.11a 6/9/12/18/24/36/48/54
- Security Systems: 64-Bit/128-Bit/152-Bit WEP Encryption; Wi-Fi Protected Access (WPA) and (WPA2) Note: There is no antenna function. An antenna will need to be purchased separately.
- Wireless Bridge (WDS)
- Wireless Mode 802.11a / 802.11 Super A static and dynamic
- WPA and WPA2 Support (WPA personal and enterprise)
- Wireless access control by MAC address (deny or accept)
- Web-based configuration via popular browser (MS IE, Netscape....)
- Windows program to help find IP in DHCP client mode
- Firmware upgrade and configuration backup via Web
- Support WME (QoS), SNTP and Syslog
- Support Rouge AP Detection and Firmware auto Update
- Reset to default via web
- Support SNMP V2.0
- Operating Environment: Operating Temperature: -30 ~ +70C
- Power: DC 48 Volt +/- 5% 0.4A (Max), AC Adapter 100V~240V
- Network Management System OS Support: Windows 2000/XP/Vista Home Basic
- Distance between the sites: Earth Curvature, the higher the antenna needs to be.
- The Fresnel Zone: This is a electromechanical phenomenon, where light and radio signals get diffracted or bent from solid objects near their path. See table below showing the 60% of Fresnel Zone Values (Accepted clearing on path).
- Objects in the path: At a frequency of say 2.4 GHz, you need a clear line of sight (LOS). Tree tops will reflect or ground the signal. The theory is that the height of the tallest object in the path of a signal should be added to the Fresnel Zone and Earth Curvature clearance heights. In this case, one should check the height of the trees, hills or any object on the link path and add this to total Tower height.
* image or specification may be changed without prior notice.
5.8GHz IEEE 802.11a Access Point, Bridge, Client (No Antenna Function)Standards Compliance: IEEE 802.11a; IEEE 802.3u; IEEE 802.3af
5.15 ~ 5.25 GHz (Lower Band)
5.25 ~ 5.35 GHz (Middle Band)
5.725 ~ 5.825 GHz (High Band)
SDRAM: 32M Byte
Flash: 8M Byte
Radio Frequency Type: DSSS / OFDM
Modulation: IEEE 802.11a: OFDM with BPSK, QPSK, 16QAM, 64QAMand 108 Mbps
Access Point Interface: Auto Sensing MDI / MDI-X Ethernet 10/100 Base - TX: RJ-45
Sensitivity: IEEE 802.11a: -70dBm @ 54 Mbps, PER < 10%
Site Survey: DHCP Client, Suppressed SSID, Station separation, supports DFS and TPC, VLAN and Priority, , Multiple SSID, isolation and Multi-BSSID
Be the first to post a review
909.598.3718 for product advice and phone orders
Live chat with us today. 08:30am - 5:00pm PST
Keep us informed. Report any errors