> Configuring your e-Net Converter (PIE-P132-X)
Step 1:

After connecting the e-Net converter to your network hub you may now attempt to setup your unit with a networked PC. From the desktop of your PC, right click the "My Network Places" icon and then left click "properties" to get to the network connections window displayed below. You may also get to this window by going to the control panel and double click "Network Connections." 

Once you see the window below right click on the network adapter that is currently connected and then left click "properties."

Step 2:

From the "General" tab select and highlight "Internet Protocol (TCP/IP)" and then click properties.
Step: 3

Your e-Net Converter operates with a default subnet mast of 255.255.0.0. You must also configure your PC to match this subnet mask. Change the subnet mask to 255.255.0.0 as shown bellow. You must also change your IP address to 192.168.123.xx, having xx be any number that is not the same as the last number of the e-Net converter's IP address. Once your subnet mask and IP address have been changed click "ok." You must also click "ok" on the previous window, "Local Area Connection Properties."
Step 4:

Setup is now complete. To configure your unit you may now run the utility program. You now must insert the supplied CD into your drive. From "My Computer" double click your CD-ROM drive. When the contents of the CD open, open the "Ethernet module" folder, then your language of choice. You may then open the "Utility" folder and double click the Etm.exe file. The utility program should then display as shown below. If your device is not detected you may click "view" then "refresh."  Once your device is shown in the Ethernet Manager window you may double click it or enter the IP address into a browser.
Step 5:

The configuration window should appear as the screenshot shown below. Note that the IP address is the same as the one from the Ethernet Manager window. You may now click "login" with the password field left blank. You may now configure your device to your desired specifications. Please refer to the manual located on the supplied CD for further configuration instructions.