Microprocessor Controlled Line Interactive Type UPS Battery Backup 600VA

Microprocessor Controlled Line Interactive Type UPS Battery Backup 600VA

Most homes or even small businesses don't include a backup power solution in case there is a power failure. An alternative is to use an Uninterruptible Power Supply or UPS. A UPS allows you to keep your devices powered on, even when there is a power failure. PI Manufacturing's UPS battery backup solutions provide performance and reliability in every situation, while providing a cost-efficient solution that is significantly lower than retail cost.

Our fully digitized microprocessor controlled line interactive UPS has several features that make it the perfect solution to your UPS battery backup needs. Rest assured that your data will be intact even when your power is not.

Features

• Auto voltage regulation
• Cold starting
• Lightning and surge protection
• Telephone/modem internet surge suppression
• Uses software to schedule shutdown, record power failure history and show basic parameters such as input/output voltage, input/output frequency, battery level, and load level

* image or specification may be changed without prior notice

Microprocessor Controlled Line Interactive Type UPS Battery Backup 600VA

AC Input

• AC Input Capacity on Battery: 600VA
• AC Input Voltage: 100V or 110V/115V/120V or 220V/230V/240V +/- 25% at line input
• AC Input Frequency: 50 or 60 Hz+/-5% (auto sensing)
• AC Input Transfer: N/A

AC Output

• AC Output Voltage: Simulated sine wave at 100V or 110V/115V/120V or 220V/230V/240V +/- 25%
• AC Output Frequency: 50 or 60Hz +/- 0.5%
• AC Output Voltage Regulation: AVR automatically increases output voltage 15% above input voltage if -9% to -25% of nominal. AVR decreases output voltage 13% below input voltage if +9% to +25% of nominal
• AC Output Transfer: 2/4 milliseconds, including detection time

Protection

• Protection Spike: 480 Joules / 2ms
• Protection Overload: UPS automatic shutdown if overload exceeds 110% nominal at 60 sec and 130% at 3 sec
• Protection Unit: Fuse for overload & short circuit protection
• Protection Inside Protection: UPS output cut off immediately or input fuse protection

Battery

• Battery Type: Sealed, Maintenance-free lead acid batteries with 3-6 year typical lifetime
• Battery Typical: 6 hours (to 90% of full capacity)
• Battery Protection: Auto discharge protection
• Battery Run Time: 25 - 35 minutes

Physical

• Physical Weight kgs: 6.3
• Physical Weight lbs: 13.8
• Physical Shipping Weight kgs: 6.8
• Physical Shipping Weight lbs: 14.9
• Physical Dimension mm: 97x320x135
• Physical Dimension inch: 3.8

Indicator

• LED: LED

Alarm

• Alarm Battery Backup: Slow beeping sound (about 0.47 Hz)
• Alarm Battery Low: Rapid beeping sound (about 1.82Hz)
• Alarm Overload: Continue beeping sound

Interface

• Interface RS-232: Yes

Environment

• Environment Ambient: 3,500 meters max. elevation, 0-95% humidity non-condensing, 0-40°c
• Environment Audible: <40dBA (1 meter from surface)
• Environment Storage Condition: 15,000 meters max. elevation
• ShowOrder: 0

Be the first to post a review