Passive Video Balun (Terminal Type), Power Converted - Camera Side

Passive Video Balun, BNC Female, Camera Side

The purpose of a passive video balun is to send a video signal and power through a Cat5e cable, this type of balun is good for setups of up to 1000 feet. PI Manufacturing offers a great passive video balun solution for your camera setup. This is great for small offices and home use at a great price due to cutting out expensive and heavy coaxial and power cables. It is also a great way to keep track of which cable belongs to which camera and in case of future maintenance, you would only be switching out a single Cat5e. Don't be fooled by other company's video baluns, 12V signals drop at about 300 feet. So if you run the cables too far, your cameras will not have enough power to operate. If you supply too much power such as an 18V, without a converter, you will burn your camera causing the project to more pricey that it needs to be. We stand behind our video baluns completely, we manufacture our own baluns and be reassured that we only use high quality materials ensuring our customers a satisfied, easy and safe setup. PI Manufacturing carries several other video balun setups, in which some includes converters for longer distance setups. We are confident that we have the perfect solution for your project whether it is for 4 cameras or 16.

Features

• Passive video balun
• Monitor side
• Provides power over Cat5
• terminal and Screw type connection
• BNC female and DC female cable

Distance chart for passive/active video

Distance chart for power transmission using Cat5 or power cables

Video and Power Pin Out Assignment

Product Tutorials

Video Balun FAQ

Video Balun User Manual

Passive Baluns with Power
Part	Camera-side Power Output	Monitor-side Power Input	Power Pairs	Cat5 Connector	Surge & Overload Protection	Integrated Cables
NVA-P-100-PW	pass-thru		3	RJ45		Y
NVA-P-100-SP		pass-thru	3	RJ45		Y
NVA-P-110-PW	pass-thru		3	terminal		Y
NVA-P-110-SP		pass-thru	3	terminal		Y
NVA-P-110-PW-SG	pass-thru		3	terminal	Surge	Y
NVA-P-110-SP-SG		pass-thru	3	terminal	Surge	Y
NVA-501-W-KIT-1	pass-thru		3	terminal
NVA-501-W-KIT-2	pass-thru		3	terminal
NVA-870-BS78-PW	12VDC 250mA		3	RJ45
NVA-870-CAB-PW	12VDC 250mA		3	RJ45		Y
NVA-870-SG-PW	12VDC 250mA		3	RJ45	surge
NVA-871-BS78-PW	12VDC 500mA		3	RJ45
NVA-870-BS78-SP		pass-thru	3	RJ45
NVA-871-SG-SP		pass-thru	3	RJ45	surge	Y
NVA-871-78-SP		pass-thru	3	RJ45		Y
NVA-871-78-PW	12VDC 500mA		3	RJ45	overload	Y
NVA-871-SG-PW	12VDC 500mA		3	RJ45	surge & overload	Y
NVA-P-201	12VDC 500mA		3	terminal
NVA-P-201-ADA		pass-thru	3	terminal
NVA-P-202-G-ADA		pass-thru	3	terminal	surge & overload	Y
NVA-P-202-ADA		pass-thru	3	terminal	overload	Y
NVA-P-202-PW	12VDC 500mA		3	terminal		Y
NVA-P-202-G-PW	12VDC 500mA		3	terminal	surge & overload	Y
NVA-875-BS78-PW	12VDC 500mA		2	RJ45	overload
NVA-875-BS78-SP		pass-thru	2	RJ45
NVA-P-301-PW	12VDC 750mA		2	RJ45	overload
NVA-P-305-PW	12VDC 1A		2	RJ45	overload
RACK-016-45-SP		pass-thru	3	RJ45
RACK-016-485-SP		pass-thru	2	RJ45

* image or specification may be changed without prior notice

Passive Video Balun, BNC Female, Provides Power Over Cat5, Camera Side

Usage: Camera side
Device category: Passive
sends power: over Cat5 cable
Connector for monitor side: BNC Female
Connector for the wires: Terminal block and screw type
Wire required: Cat5, Cat6, or phone cable
Maximum Distance: 1,000ft
Power Adapter Requirement: 24VDC adapter included; balun accepts 18V-24V DC
Remote power transmission: Receives up to 24VDC Outputs 12VDC to camera 500mA
Dimensions: 2.5" (64mm) x 3.0" (75mm) x 1.0" (25mm)
Weight: 2.2oz (60g)
Frequency response: DC to 6.5 MHz
Attenuation: RL = 75 to 100: 0.4 dB, RL = 75 to 600: 1.2 dB
Impedance: Coax - 75 ohm
UTP / Telephone cable - 100/600 ohm
Coax: unbalanced, 75 ohm
UTP C5E: Balanced twisted pair, 24 AWG, 100 ohm
Telephone cable: Balanced twisted pair, 26-28 AWG, 600 ohm

Be the first to post a review