Passive Video Balun (RJ-45 Type), Power Pass-Through - Monitor Side

Passive Video Balun (RJ-45 Type), Power Pass-Through - Monitor Side

PI Manufacturing's passive video balun for RJ-45 type connections is the perfect solution for utilizing pre-assembled Cat5e or UTP cable to extend the distance of your security camera up to 500 feet of data and power. PI Manufacturing's video balun allows for convenient video and power transmission over distance without dragging heavy and expensive coaxial cables and having a power outlet near by to power up the camera. Power from this video balun (monitor side) passes through to give power to the camera side. Note: The video balun does not convert power to 12V. Do not use power over 12V or you may burn the camera.

Features

• Passive video balun
• Monitor side
• Power voltage will pass through
• RJ-45 (8P8C) type connection
• BNC male and DC female cable
• 6 inch pigtail cable

Diagram Example Setup

Distance chart for passive/active video

Distance chart for power transmission using Cat5 or power cables

Video and Power Pin Out Assignment

Product Tutorials

Video Balun FAQ

Video Balun User Manual

Passive Baluns with Power
Part	Camera-side Power Output	Monitor-side Power Input	Power Pairs	Cat5 Connector	Surge & Overload Protection	Integrated Cables
NVA-P-100-PW	pass-thru		3	RJ45		Y
NVA-P-100-SP		pass-thru	3	RJ45		Y
NVA-P-110-PW	pass-thru		3	terminal		Y
NVA-P-110-SP		pass-thru	3	terminal		Y
NVA-P-110-PW-SG	pass-thru		3	terminal	Surge	Y
NVA-P-110-SP-SG		pass-thru	3	terminal	Surge	Y
NVA-501-W-KIT-1	pass-thru		3	terminal
NVA-501-W-KIT-2	pass-thru		3	terminal
NVA-870-BS78-PW	12VDC 250mA		3	RJ45
NVA-870-CAB-PW	12VDC 250mA		3	RJ45		Y
NVA-870-SG-PW	12VDC 250mA		3	RJ45	surge
NVA-871-BS78-PW	12VDC 500mA		3	RJ45
NVA-870-BS78-SP		pass-thru	3	RJ45
NVA-871-SG-SP		pass-thru	3	RJ45	surge	Y
NVA-871-78-SP		pass-thru	3	RJ45		Y
NVA-871-78-PW	12VDC 500mA		3	RJ45	overload	Y
NVA-871-SG-PW	12VDC 500mA		3	RJ45	surge & overload	Y
NVA-P-201	12VDC 500mA		3	terminal
NVA-P-201-ADA		pass-thru	3	terminal
NVA-P-202-G-ADA		pass-thru	3	terminal	surge & overload	Y
NVA-P-202-ADA		pass-thru	3	terminal	overload	Y
NVA-P-202-PW	12VDC 500mA		3	terminal		Y
NVA-P-202-G-PW	12VDC 500mA		3	terminal	surge & overload	Y
NVA-875-BS78-PW	12VDC 500mA		2	RJ45	overload
NVA-875-BS78-SP		pass-thru	2	RJ45
NVA-P-301-PW	12VDC 750mA		2	RJ45	overload
NVA-P-305-PW	12VDC 1A		2	RJ45	overload
RACK-016-45-SP		pass-thru	3	RJ45
RACK-016-485-SP		pass-thru	2	RJ45

* image or specification may be changed without prior notice

Passive Video Balun, BNC Male, Monitor Side

Usage: Monitor side
Device category: Passive, can receive power from Cat5 and output 12VDC to the camera
Connector for camera: BNC Terminal type
Wire required: Cat5, Cat6
Maximum distance: 300ft
Remote power: Power Pass-through
Dimensions: 1.19" (64mm) x 2.44" (61mm) x 1.0" (23mm)
Weight: 1.1oz (30g)
Frequency response: DC to 6.5 MHz
Attenuation: RL = 75 to 100: 0.4dB, RL = 75 to 600: 1.2dB Impedance: Coax - 75 ohm
Coax: unbalanced, 75 ohm
UTP C5E: Balanced twisted pair, 24 AWG, 100 ohm
Telephone cable: Balanced twisted pair, 26-28 AWG, 600 ohm

Be the first to post a review