Active Video Balun, Female BNC Connector, Terminal Type, Monitor Side

Active Video Balun, Female BNC Connector, Terminal Type, Monitor Side

Setting up security cameras in a tight space can be a headache. With running video lines and equivalent power lines, you can end up with a tangled ball of mess which is extremely hard to keep track of. The purpose of active baluns is to extend your camera setups up to 6000ft. PI Manufacturing offers a great active video balun solution for your long distance setup. This is great for big complexes and parking structures at a great price due to cutting out expensive and heavy coaxial and power cables. It is also a great way to keep track of which cable belongs to which camera and in case of future maintenance, you would only be switching out a single CAT5e. Don't be fooled by other company's video baluns, 12V signals drop at about 300 ft. So if you run the cables too far, your cameras will not have enough power to operate. If you supply too much power such as an 18V, without a converter, you will burn your camera causing the project to more pricey that it needs to be. We stand behind our video baluns completely, we manufacture our own baluns and be reassured that we use only high quality materials ensuring our customers a satisfied, easy and safe setup. PI Manufacture carries several other video balun setups, in which some includes converters for longer distance setups. We are confident that we have the perfect solution for your project whether it is for 4 cameras or 164.

Typical application

Distance chart for passive/active video

Distance chart for power transmission using Cat5 or power cables

Video and Power Pin Out Assignment

Product Tutorials

Video Balun FAQ

Video Balun User Manual

* image or specification may be changed without prior notice

Usage: Monitor side
Device category: Active (color balance and gain control provided)
Connector for monitor: BNC Female
Connector for the wires: Terminal block
Wire required: Cat5, Cat6, or phone cable
Maximum Distance: 6,000 ft
AC Adapter Requirement: 12V DC, 75mA
Dimensions: (W) 1.20" (30mm), (H)0.9" (23.1mm), (L)2.0" (51.3mm)
Weight: 2.1oz (60g) Frequency response: DC to 110 MHz
Impedance: Coax - 75 ohm, UTP / telephone cable - 100/600 ohm
Coax: 75 ohm
UTP C5E: Balanced twisted pair, 24 AWG / 100 ohm
Telephone cable: Balanced twisted pair 26-28 AWG / 600 ohm
Amplified bandwidth: RL 100/600 to 75
Gain at 0 dB: 110 MHz
Gain at 12 dB: 30 MHz
High Freq. Noise Rejection: 8 MHz: -3 dB, 12 MHz: -12 dB

Be the first to post a review