100Base-FX (ST) Multimode to 10/100Base-TX Fast Ethernet Media Converter

100Base-FX (ST) Multimode to 100Base-TX Fast Ethernet Media Converter

The MC-ST-100M is IEEE802.3/u Ethernet support two type media for network connection such as 10/100Base-TX and 100Base-FX. The bridge media converter is designed with a switch controller and buffer memory that connect two type segments operation smoothly. This converter can be used as a standalone unit or as a slide-in module to the 19" converter rack (up to 10 units) for use at a central wiring closet.

Features

• Fiber ST Multimode to 10/100BaseTX converter
• Extends ethernet distance by converting RJ-45 to fiber optics and vice versa
• 850nm Wavelength
• 100Mbps
• 2km max for fiber connection
• Provides MDIX&MDI auto-sensing port
• Full wire speed forwarding rate
• Supports link fault pass through
• Supports full and half duplex modes on TX port
• Hot-swappable when used with a chassis
• Power adapter included

* image or specification may be changed without prior notice

TP-Fiber Specification

Standards : IEEE802.3x 100Base-TX/FX
UTP Cable: cat5 cable up to 300 feet
Fiber Cable: 50/125, 62.5/125 or 100/140um multi-mode
8.3/125, 8.7/125 , 9/125 or 10/125um single-mode
LED Indicators: Power, fx link/ACT, 100, TP link/ACT, FDX/COL
Data Transfer Rate: 100Mbps = 148,800PPS
Flow Control: IEEE802.3x compliant for full-duplex
Back pressure flow control for half-duplex
Power Requirement : 5V DC @ 1A
Ambient Temperature: 0°C to 50%
Humidity: 5% to 90%
Dimension: 26(H)x70(w)x94(D)mm
Note: Connecting to Router, Bridge or Switch please refer to the device's Technical Manual.

Be the first to post a review